Common problems of network interface equipment configuration parameters

Ethernet configuration software is used to configure the parameters of network interface equipment.

1. Default parameters of network interface equipment:

IP address port number network working mode device address

Static: 192.168.1.232 10000 TCP server 1

2. Hardware connection mode of network interface equipment:

network cable direct connection:

via switch / Router:

3. Preparatory work

? network cable direct connection: change the computer IP to the following:

? when passing through the switch / router, it can be obtained automatically;

? disable all network cards except local connection in the change adapter management in the computer network and sharing center;

¢Ù; Open network and Sharing Center

¢Ú; Change adapter settings

¢Û Computer network connection

If there is a virtual network card, Bluetooth, etc., it also needs to be disabled.

4. Software operation instructions

? when setting equipment parameters, you must first select the equipment:

? specific operation

? IP address modification

How to judge whether the IP in the current network is occupied:

? description of network working mode

TCP Server£º

Dam device network working mode

TCP Client£º

Dam device network working mode

At this time, the following two parameters can be set

Login package: the information sent when the device connects to the server for the first time as a TCP client;

Heartbeat packet: set the information sent to the server at a fixed interval.